Harap pilih lokasi pengiriman Anda

Pilih halaman negara/wilayah yang dapat mempengaruhi berbagai faktor seperti harga, pilihan pengiriman dan ketersediaan produk.
Lihat semua lokasi
Ke www.igus.com
myigus
Keranjang belanja
(0)
Kontak
PT. igus® Indonesia

Taman Tekno BSD

Sektor XI, Blok L1 No. 15

Tangerang Selatan 15314

+62 21 7588 1933
+62 21 7588 1932
Kirim pesan
Lihat semua kontak
ID(ID)
Menu
  1. Beranda
  2. Joint bearing
  3. Pillow block bearing
  4. Pillow block bearing, ESTM-GT 150, igubal®

Pillow block bearing, ESTM-GT 150, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Housing material: iglidur® GLW
  • Static loads up to 4 tons
  • Split pillow block bearing for diameters up to 150 mm
  • Reduce assembly time by up to 50%

Tidak yakin akan pas?

Expert system
Download CAD files
Free sample request
Ask the expert

Ask the expert

igubal contact request
Keterangan produk
igubal® pillow block bearings
 
igubal® pillow block bearings are bearing units very easy to install and which are able to compensate alignment errors and prevent edge pressure.
 
The standard version consists of two parts made from  iglidur® GLW, a material preferred in applications with static load, where only occasional movement takes place. Suitable for temperatures from -40 °C to +100 °C in long-term use.
A four-part version is also available upon request. It includes an additional lining made from different iglidur® materials for various applications.
  • Easy to assemble and disassemble
  • Ideal for outdoor applications
  • High loads

Typical application areas
  • Plant construction
  • Automation
  • Mechanical engineering
  • Food industry
  • Agricultural machines
     
    You will find plenty of additional application areas at our Industry solutions
 
When to use it?
  • If chemical resistance is required
  • If a cost-effective option is required
  • If you need dirt-resistant bearings
  • To adjust misalignments
When not to use it?
  • If temperatures are higher than +100 °C
  • If an integrated adjusting ring is required
  • If diameters above 150 mm are required
  • If rotation speeds higher than 0.5 m/s are required
Use our filter options to find the suitable product
Application areas
 
Due to the fact that igubal® pillow block bearings are suitable for maintenance-free dry operation, they are worth considering in particular for applications where the installation site is difficult to access, in a humid or wet environment or when there are special hygiene demands. As a result, igubal® pillow block bearings are used for instance in wash-brush controls, in facade sunshade systems, in materials handling technology and in bakery equipment.
 
Assembly
 
igubal® pillow block bearings are designed for mounting with two bolts. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors. Special adjusting rings can be used to fix the shaft.
Data teknis
Unduhan

Solusi lainnya

Pillow block bearing, ESTM-GT, igubal®
Pillow block bearing, ESTM-GT, igubal®

Split, two mounting holes, dimensional series E

dari 76.720 IDR/Buah
Clip bearing, heavy duty, ECLM-HD, igubal®
Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

dari 139.468 IDR/Buah
Spherical bearing, KGLI, inch, igubal®
Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

dari 62.132 IDR/Buah
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

dari 143.276 IDR/Buah
Spherical insert bearing, JEM, narrow, mm, igubal®
Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

dari 500.836 IDR/Buah
Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series K, housing B

atas permintaan
Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series K, housing B

atas permintaan
Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series E, housing B

atas permintaan
Rod end bearing with female thread, detectable EBLM, spherical ball iglidur® RN248, mm
Rod end bearing with female thread, detectable EBLM, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series E, housing B

atas permintaan
Spherical ball, cost-effective, RKM, mm, igubal®
Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

dari 54.824 IDR/Buah
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

dari 341.376 IDR/Buah
Spherical ball for underwater applications, UWEM, mm, igubal®
Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

dari 39.172 IDR/Buah
Spherical ball, clearance-free, J4VEM, mm, igubal®
Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

dari 44.688 IDR/Buah
Spherical insert bearing, A350EM, narrow, mm, igubal®
Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

dari 622.860 IDR/Buah
Spherical ball, WEI, inch, igubal®
Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

dari 54.516 IDR/Buah
Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

dari 39.928 IDR/Buah
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

dari 99.400 IDR/Buah
Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

dari 118.244 IDR/Buah
In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

dari 63.084 IDR/Buah
In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

dari 43.428 IDR/Buah
Adapter screw, PKRM, igubal®
Adapter screw, PKRM, igubal®

Right-hand thread

dari 157.864 IDR/Buah
Clevis joint, detectable, GERM-DT, igubal®
Clevis joint, detectable, GERM-DT, igubal®

Detectable, right-hand thread

dari 148.344 IDR/Buah
Spring-loaded fixing clip, detectable, GEFM-DT, igubal®
Spring-loaded fixing clip, detectable, GEFM-DT, igubal®

Detectable

dari 26.936 IDR/Buah
Clevis joint with pin and circlip, GELMK, igubal®
Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

dari 66.892 IDR/Buah
Clevis joint with spring-loaded fixing clip, GELMF, igubal®
Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

dari 69.412 IDR/Buah
Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®
Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®

Detectable, right-hand thread

dari 171.472 IDR/Buah
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

dari 176.232 IDR/Buah
igubal® pillow block bearing, KSTM
igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

dari 108.416 IDR/Buah
Pillow block bearing, ESTM, W300, igubal®
Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

dari 89.712 IDR/Buah
Pillow block bearing, ESTM-GT-GT, igubal®
Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

dari 169.904 IDR/Buah
igubal® AD-01-ESTM adapter for pillow block bearings
igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

atas permintaan
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

dari 661.528 IDR/Buah
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

dari 240.268 IDR/Buah
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

dari 263.732 IDR/Buah
Spherical bearing, EGLM, igubal®
Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

dari 111.272 IDR/Buah
Spherical thrust bearing, SAM, igubal®
Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

dari 76.384 IDR/Buah
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

dari 151.508 IDR/Buah
Spherical bearing, low cost, KGLM LC, J4, igubal®
Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

dari 75.768 IDR/Buah
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

dari 134.708 IDR/Buah
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

dari 259.280 IDR/Buah
Double joint, EGZM, J4VEM, igubal®
Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

atas permintaan
Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

dari 118.244 IDR/Buah
Variable coupling joint, WDGM, with ball studs, igubal®
Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

dari 184.660 IDR/m
Variable double joint, KDGM, R, igubal®
Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

dari 308.868 IDR/Buah
Variable double joint, KDGM, EK, igubal®
Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

dari 452.788 IDR/Buah
Clevis joint, GERI, igubal®
Clevis joint, GERI, igubal®

Right-hand thread

dari 59.276 IDR/Buah
Spherical bearing, slim line, KGLI SL, igubal®
Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

dari 64.988 IDR/Buah
Clevis joint with pin and circlip, GERIK, igubal®
Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

dari 66.920 IDR/Buah
Split pillow block bearing for square profiles, ESQM, igubal®
Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

dari 2.060.352 IDR/Buah
Clip bearing with galvanised steel ball studs, igubal®
Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

dari 84.000 IDR/Buah
Ball stud made of tribo-plastic with male thread, GZRM, igubal®
Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

dari 14.252 IDR/Buah
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

dari 54.600 IDR/Buah
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

dari 888.160 IDR/m

Konsultasi

Photo
Sophian Bin Saob

National

+62 21 7588 1933
Tulis e-mail

Pengiriman dan konsultasi

Secara pribadi:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

Online:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.