Variable double joint, KDGM, R, igubal®

Dimensional series: K, following DIN ISO 12240
Housing material: igumid G
Material of spherical ball: iglidur® R
Spherical ball diameters 6, 8, 10 and 12 mm
Individual centre dimensions and lengths
Individual alignment of the bearing position

Tidak yakin akan pas?

Keterangan produk

igubal® spherical bearings

The use of spherical bearings is usually associated with high weight bearing materials, difficult installation, and high costs. Most of the time, maintenance is still necessary over the long-term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.

Here, the spherical ball is manufactured from iglidur® R, which is a low-cost material with low coefficients of friction and good wear resistance at low to medium loads.

Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant

Typical application areas

Food industry
Railway technology
Automotive industry
Plant construction

You will find plenty of additional application areas at our Industry solutions

When to use it?

For high axial and radial loads
When easy installation is required
In case of cramped installation space
If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments

When not to use it?

If temperatures are higher than +80 °C
If diameters above 12 mm are required
If rotation speeds higher than 0.5 m/s are required

Use our filter options to find the suitable product

Tolerances
Maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Check the inner diameter

Assembly
igubal® spherical bearings are press-fitted into a recommended H7 housing bore and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

Data teknis

Unduhan

Solusi lainnya

Double joint, EGZM, R, igubal®

Robust plastic, dimensional series E

dari 61.824 IDR/Buah

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

dari 500.836 IDR/Buah

Rod end bearing with male thread, KARM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, right-hand thread, dimensional series K, housing A, metal housing

dari 129.640 IDR/Buah

Rod end bearing with male thread, KALM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, left-hand thread, dimensional series K, housing A, metal sleeve

dari 129.640 IDR/Buah

Rod end with female thread, KBRM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, right-hand thread, dimensional series K, housing B

dari 116.956 IDR/Buah

Rod end with female thread, KBLM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Classic design, left-hand thread, dimensional series K, housing B

dari 117.292 IDR/Buah

Rod end with female thread, KCLM, with stainless steel sleeve, spherical ball iglidur® W300, mm

Left-hand thread, dimensional series K, housing C

dari 135.800 IDR/Buah

Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series K, housing B

atas permintaan

Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series K, housing B

atas permintaan

Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series E, housing B

atas permintaan

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

dari 54.824 IDR/Buah

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

dari 341.376 IDR/Buah

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

dari 39.172 IDR/Buah

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

dari 44.688 IDR/Buah

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

dari 622.860 IDR/Buah

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

dari 54.516 IDR/Buah

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

dari 39.928 IDR/Buah

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

dari 99.400 IDR/Buah

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

dari 118.244 IDR/Buah

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

dari 63.084 IDR/Buah

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

dari 43.428 IDR/Buah

Adapter screw, PKRM, igubal®

Right-hand thread

dari 157.864 IDR/Buah

Clevis joint, detectable, GERM-DT, igubal®

Detectable, right-hand thread

dari 148.344 IDR/Buah

Spring-loaded fixing clip, detectable, GEFM-DT, igubal®

Detectable

dari 26.936 IDR/Buah

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

dari 66.892 IDR/Buah

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

dari 69.412 IDR/Buah

Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®

Detectable, right-hand thread

dari 171.472 IDR/Buah

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

dari 176.232 IDR/Buah

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

dari 108.416 IDR/Buah

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

dari 89.712 IDR/Buah

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

dari 169.904 IDR/Buah

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

atas permintaan

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

dari 661.528 IDR/Buah

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

dari 240.268 IDR/Buah

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

dari 263.732 IDR/Buah

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

dari 111.272 IDR/Buah

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

dari 139.468 IDR/Buah

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

dari 62.132 IDR/Buah

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

dari 76.384 IDR/Buah

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

dari 143.276 IDR/Buah

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

dari 151.508 IDR/Buah

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

dari 75.768 IDR/Buah

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

dari 134.708 IDR/Buah

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

dari 259.280 IDR/Buah

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

atas permintaan

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

dari 118.244 IDR/Buah

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

dari 184.660 IDR/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

dari 308.868 IDR/Buah

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

dari 452.788 IDR/Buah

Clevis joint, GERI, igubal®

Right-hand thread

dari 59.276 IDR/Buah

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

dari 64.988 IDR/Buah

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

dari 66.920 IDR/Buah

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

dari 2.060.352 IDR/Buah

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

dari 84.000 IDR/Buah

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

dari 14.252 IDR/Buah

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

dari 54.600 IDR/Buah

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

dari 888.160 IDR/m

Harap pilih lokasi pengiriman Anda