Kontak
PT. igus® Indonesia

Taman Tekno BSD

Sektor XI, Blok L1 No. 15

Tangerang Selatan 15314

+62 21 7588 1933
+62 21 7588 1932

iglidur® J3, sleeve bearing with flange, imperial

  • Very good wear resistance at roomtemperature
  • Very good wear resistance at medium high temperatures
  • Extremely good coefficient of friction
  • Low humidity absorption
  • Good wear resistance under water
  • High media resistance
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Resistant to dirt and dust
Keterangan produk
iglidur® J3 |The new endurance runner: specialist for pulsating loads
iglidur® J3 is a material with improved wear resistance at low to medium loads and high speed. The lifetime is up to 300 % longer than iglidur® J – the proven top endurance runner material.
 
Typical application areas

Vending machinery
Printing industry
Beverage industry
Glass industry
Aviation


You will find plenty of additional application areas at our Industry solutions
 
 
When to use it?
  • If wear resistance rotating or oscillating of iglidur® J should be optimised
  • When very low coefficients of friction in dry operation are required
  • If high wear resistance at low loads is required
  • If low moisture absorption is requested
  • If good liquid media resistance is required
When not to use?
  • If you need a wear resistant bearing for linear motion
  • If temperatures are higher than +90 °C
  • If radial surface pressure is higher than 35 MPa

 
Use our filter options to find the suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglidur® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglidur® - assembling, gluing, machining
 
Sertifikat dan standar
RoHS compliant
According to 2011/65/EU (RoHS 2)
Data teknis
Aksesori
Unduhan

Konsultasi

Photo
Sophian Bin Saob

Product Manager Bearings National

Tulis e-mail

Pengiriman dan konsultasi

Secara pribadi:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

Online:

24h