Harap pilih lokasi pengiriman Anda

Pilih halaman negara/wilayah yang dapat mempengaruhi berbagai faktor seperti harga, pilihan pengiriman dan ketersediaan produk.
Kontak
PT. igus® Indonesia

Taman Tekno BSD

Sektor XI, Blok L1 No. 15

Tangerang Selatan 15314

+62 21 7588 1933
+62 21 7588 1932
ID(ID)

drylin® R shaft guides

Components within the drylin® R shaft guides are identically dimensioned as recirculating ball bearings - in contrast, the drylin® R systems minimise noise emissions and reduce surface pressure by the larger contact area between guide and shaft. This allows the use of soft shaft materials such as aluminium or carbon fibre. All in all, the largest range of shafts is available in the programme of shaft linear guides with seven different materials. In combination with three different bearing types made of solid plastic, aluminium or stainless steel as well as five linear liners for different environments, drylin® R is suitable for maximum flexibility and all applications. The unique geometry of the bearing liners ensures a firm hold in the housing by means of a positive locking. This is contrary to glued or pressed solutions even under extreme conditions such as temperature, pressure, impacts and water. As required, a quick replacement of the individual linear liner is also possible.
 

Jumlah produk: 106

drylin® R pillow block RJUM-05

Find suitable replacement liners for the RJUM-05 linear slide bearing here
 
  • Design: short, closed design
  • Material sliding element: iglidur® J
  • Housing material: aluminium
dari 469.080 IDR/Buah
9 item, yang siap dikirim:
9 dalam 24 jam
Ke halaman produk

drylin® R pillow block FJUMT-01

  • Design: closed design, tandem design, round flange
  • Material sliding element: iglidur® J
  • Housing material: anodised aluminium
dari 507.705 IDR/Buah
8 item, yang siap dikirim:
8 dalam 24 jam
Ke halaman produk

drylin® R aluminium shaft, solid/hollow shaft, AWMP

  • Lightweight
  • Optimal in combination with iglidur® J/J200 liners
  • Low wear of plain bearings
  • Corrosion-resistant
  • Aluminium EN AW 6060/6061 (ALU)
  • Straightness: EN 754-3
Here you can CNC-machine the shaft in the 3D shaft designer.
dari 271.320 IDR/m
13 item, yang siap dikirim:
13 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R liner JUM-01

  • Material: iglidur® J for all shaft surfaces in indoor and outdoor use 
  • Version: enclosed housing, long design
dari 77.146 IDR/Buah
10 item, yang siap dikirim:
8 dalam 24 jam
2 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R pillow block OJUM-06

  • Design: long, open design
  • Material sliding element: iglidur® J
  • Housing material: anodised aluminium
dari 609.047 IDR/Buah
7 item, yang siap dikirim:
7 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R pillow block FJUM-01

  • Design: closed design, round flange
  • Material sliding element: iglidur® J
  • Housing material: anodised aluminium
dari 350.615 IDR/Buah
9 item, yang siap dikirim:
9 dalam 24 jam
Ke halaman produk

drylin® R liner JUM-02

  • Material: iglidur® J for all shaft surfaces in indoor and outdoor use
  • Version: Enclosed, short design 
dari 76.205 IDR/Buah
9 item, yang siap dikirim:
8 dalam 24 jam
1 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R linear slide bearing RJ4JP-01

  • Alternative to ball bearings with Japanese dimension
  • Quick assembly
  • Secured by circlips
  • Plain bearing material: iglidur® J4
dari 19.167 IDR/Buah
7 item, yang siap dikirim:
7 dalam 24 jam
Ke halaman produk

drylin® R aluminium shaft, supported, AWMU, EN AW 6061/6060

  • Lightweight
  • Ideal in combination with liners made from iglidur® J/J200
  • Low wear
  • Corrosion-free
  • Aluminium EN AW 6060/6061 (ALU)
Here you can CNC-machine the shaft in the 3D shaft designer.
dari 1.594.029 IDR/m
6 item, yang siap dikirim:
6 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R pillow block RJUM-06

Matching replacement liners for the RJUM-06 housing bearing can be found here
 
  • Design: closed housing, long design
  • Material sliding element: iglidur® J
  • Housing material: anodised aluminium
dari 643.690 IDR/Buah
7 item, yang siap dikirim:
7 dalam 24 jam
Ke halaman produk

drylin® R stainless steel shaft, EEWM, 1.4034

  • High corrosion resistance
  • High chemical resistance
  • Ideal solution for wet applications
  • Stainless steel EEWM AISI 420C (X46)
Here you can CNC-machine the shaft in the 3D shaft designer.
dari 692.120 IDR/m
10 item, yang siap dikirim:
10 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R liner J200UM-01

  • Material: iglidur® J200 
  • Design: for enclosed linear housings, long type 
dari 101.920 IDR/Buah
8 item, yang siap dikirim:
8 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R linear slide bearing RJUM-01

  • Secured by circlips
  • Enclosed anodised aluminium adapter
  • Material of the liner: iglidur® J
Find suitable replacement liners for the RJUM-01 linear slide bearing here
dari 123.641 IDR/Buah
12 item, yang siap dikirim:
11 dalam 24 jam
1 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R steel shaft, SWM, 1.1213

  • Cost-effective standard
  • High load capacity
  • Dry area applications
  • Lower coefficient of friction against polymer bearings
  • 1.1213 (Cf53) steel
Here you can CNC-machine the shaft in the 3D shaft designer.
dari 355.840 IDR/m
10 item, yang siap dikirim:
10 dalam 10 - 14 hari kerja
Ke halaman produk

drylin® R liner E7UMO-01

  • Material: iglidur® E7 
  • Version: long, open design 
dari 107.878 IDR/Buah
9 item, yang siap dikirim:
9 dalam 10 - 14 hari kerja
Ke halaman produk

Konsultasi

Photo
Sophian Bin Saob

National

Tulis e-mail

Pengiriman dan konsultasi

Secara pribadi:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.