Kontak
PT. igus® Indonesia

Taman Tekno BSD

Sektor XI, Blok L1 No. 15

Tangerang Selatan 15314

+62 21 7588 1933
+62 21 7588 1932

Bar stock for motion

The round rods made of of the iglidur® range of bar stock can be ordered in individual lengths from 100 mm to 1000 mm and with a diameter of 10 mm to 100 mm. We offer different materials to meet the different requirements of each application. Here, you can find the right round-rod material - whether for low, medium or high speeds, for temperatures up to 250 °C or for mainly stationary or extreme loads, in other words for almost every requirement.
Like every igus® product, the round rods are also suitable for absolutely lubrication-free use and are therefore not only maintenance-free but are also especially hygienic.
For example, iglidur® round rods are used in the area of medical technology and in the food and packaging industry.

Kategori
Filter
Kriteria Utama
Requirements
Material

Jumlah produk: 28

iglidur® A350, round bar

  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     
dari 41,06 USD/m
14 item, yang siap dikirim:
11 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J, round bar

  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption
dari 11,12 USD/m
16 item, yang siap dikirim:
15 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® X, round bar

  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength
dari 99,42 USD/m
15 item, yang siap dikirim:
12 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, round bar

  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance
dari 10,70 USD/m
12 item, yang siap dikirim:
11 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A160, round bar

  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • Lubrication and maintenance-free
dari 38,88 USD/m
10 item, yang siap dikirim:
9 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A181, round bar

  • For use with temperatures up to +90 °C
  • The food grade material, FDA and EC regulation 10/2011 EC compliant
  • Good media resistance
dari 21,69 USD/m
8 item, yang siap dikirim:
8 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H1, round bar

  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free
dari 99,23 USD/m
7 item, yang siap dikirim:
7 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J2, round bar

  • Good mechanical properties, robust
  • Cost-effective
  • Good media resistance
  • Lubrication and maintenance-free
dari 90,88 USD/m
1 item, yang siap dikirim:
1 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J3, round bar

  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free
dari 20,17 USD/m
9 item, yang siap dikirim:
9 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J4, round bar

  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption
dari 23,76 USD/m
14 item, yang siap dikirim:
14 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J200, round bar

  • Very long service life with hard anodised aluminium
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Lubrication and maintenance-free
atas permintaan
3 item, yang siap dikirim:
3 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J260, round bar

  • Very good coefficient of friction for low or medium loads
  • Good media resistance
  • Long service life – even on polymer shafts and in other special cases
  • Lubrication and maintenance-free
dari 89,72 USD/m
2 item, yang siap dikirim:
2 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J350, round bar

  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements
dari 59,09 USD/m
13 item, yang siap dikirim:
13 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® M250, round bar

  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance
dari 34,87 USD/m
6 item, yang siap dikirim:
6 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® P210, round bar

  • Low moisture absorption
  • Good coefficients of friction and wear on almost every shaft
  • Good price/performance ratio
dari 86,65 USD/m
10 item, yang siap dikirim:
10 dalam 10 - 14 hari kerja
Ke halaman produk
RoHS compliant
According to 2011/65/EU (RoHS 2)

Konsultasi

I would be happy to answer your questions personally

Photo
Luo Zhao Ming

Product Manager

Tulis e-mail

Pengiriman dan konsultasi

Secara pribadi:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.