Harap pilih lokasi pengiriman Anda

Pilih halaman negara/wilayah yang dapat mempengaruhi berbagai faktor seperti harga, pilihan pengiriman dan ketersediaan produk.
Lihat semua lokasi
Ke www.igus.com
myigus
Keranjang belanja
(0)
Kontak
PT. igus® Indonesia

Taman Tekno BSD

Sektor XI, Blok L1 No. 15

Tangerang Selatan 15314

+62 21 7588 1933
+62 21 7588 1932
Kirim pesan
Lihat semua kontak
ID(ID)
Menu
  1. Beranda
  2. Joint bearing
  3. Clip bearing yang mampu menyejajarkan sendiri
  4. Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Housing material: igumid G 
  • Material of spherical ball: iglidur® UW
  • Maintenance-free dry operation
  • Easy installation
  • Max. tolerance compensation ±0.2 mm

Tidak yakin akan pas?

Expert system
Free sample request
Keterangan produk
igubal® spherical bearing

The use of spherical bearings is usually associated with high weights of the bearings, difficult installation and high costs. In most cases, however, maintenance is required in the longer term and the bearings are only corrosion-free in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings ends these disadvantages and opens up new possibilities through their design: They are easy to handle, cost-effective, very lightweight and very robust.

The housing is made of igumid® G, a particularly impact-resistant, long-fibre reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.

Here, the spherical ball is made of iglidur® UW, a material for underwater applications with higher temperatures up to +250°C. In addition, the plain bearings will run in chemicals which would act as a lubricant.
  • Maintenance-free dry operation
  • Easy installation

Typical applications
  • Food industry
  • Railway technology
  • Automotive industry
  • Plant engineering

    You can find many other areas of application at our
 
When to use it?
  • When I have high axial and radial load
  • For the simplest installation
  • When extremely small installation spaces are available
  • When chemical resistance is required
  • If a cost-effective alternative is needed
  • When dirt-resistant bearings are required
  • If misalignments are to be compensated
When not to use it?
  • If temperatures are higher than +80°C
  • If diameters above 30 mm are required
  • If rotation speeds of more than 0.5 m/s are to be achieved


Tolerances
Maintenance-free igubal® spherical bearings are designed with a tolerance in the inner diameter according to E10. The shaft tolerance should be between h6 and h9. The bearing clearance compensates for bearing expansion due to warming.Assembly
Due to the tolerance compensation, no exactly toleranced housing is required. Please refer to the technical data for the respective maximum and minimum dimensions of the housing hole. In order to achieve the axial loads specified there, the bearing should be additionally secured axially.
Data teknis
Unduhan

Solusi lainnya

iglidur® UW, sleeve bearing, mm
iglidur® UW, sleeve bearing, mm

The underwater endurance runner, for fast rotation under water

dari 79.800 IDR/Buah
iglidur® UW, sleeve bearing with flange, mm
iglidur® UW, sleeve bearing with flange, mm

The underwater endurance runner, for fast rotation under water

dari 80.080 IDR/Buah
Clip bearing, heavy duty, ECLM-HD, igubal®
Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

dari 139.468 IDR/Buah
Spherical bearing, KGLI, inch, igubal®
Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

dari 62.132 IDR/Buah
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

dari 143.276 IDR/Buah
Spherical insert bearing, JEM, narrow, mm, igubal®
Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

dari 500.836 IDR/Buah
Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series K, housing B

atas permintaan
Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series K, housing B

atas permintaan
Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series E, housing B

atas permintaan
Rod end bearing with female thread, detectable EBLM, spherical ball iglidur® RN248, mm
Rod end bearing with female thread, detectable EBLM, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series E, housing B

atas permintaan
Spherical ball, cost-effective, RKM, mm, igubal®
Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

dari 54.824 IDR/Buah
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

dari 341.376 IDR/Buah
Spherical ball for underwater applications, UWEM, mm, igubal®
Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

dari 39.172 IDR/Buah
Spherical ball, clearance-free, J4VEM, mm, igubal®
Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

dari 44.688 IDR/Buah
Spherical insert bearing, A350EM, narrow, mm, igubal®
Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

dari 622.860 IDR/Buah
Spherical ball, WEI, inch, igubal®
Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

dari 54.516 IDR/Buah
Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

dari 39.928 IDR/Buah
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

dari 99.400 IDR/Buah
Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

dari 118.244 IDR/Buah
In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

dari 63.084 IDR/Buah
In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

dari 43.428 IDR/Buah
Adapter screw, PKRM, igubal®
Adapter screw, PKRM, igubal®

Right-hand thread

dari 157.864 IDR/Buah
Clevis joint, detectable, GERM-DT, igubal®
Clevis joint, detectable, GERM-DT, igubal®

Detectable, right-hand thread

dari 148.344 IDR/Buah
Spring-loaded fixing clip, detectable, GEFM-DT, igubal®
Spring-loaded fixing clip, detectable, GEFM-DT, igubal®

Detectable

dari 26.936 IDR/Buah
Clevis joint with pin and circlip, GELMK, igubal®
Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

dari 66.892 IDR/Buah
Clevis joint with spring-loaded fixing clip, GELMF, igubal®
Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

dari 69.412 IDR/Buah
Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®
Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®

Detectable, right-hand thread

dari 171.472 IDR/Buah
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

dari 176.232 IDR/Buah
igubal® pillow block bearing, KSTM
igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

dari 108.416 IDR/Buah
Pillow block bearing, ESTM, W300, igubal®
Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

dari 89.712 IDR/Buah
Pillow block bearing, ESTM-GT-GT, igubal®
Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

dari 169.904 IDR/Buah
igubal® AD-01-ESTM adapter for pillow block bearings
igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

atas permintaan
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

dari 661.528 IDR/Buah
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

dari 240.268 IDR/Buah
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

dari 263.732 IDR/Buah
Spherical bearing, EGLM, igubal®
Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

dari 111.272 IDR/Buah
Spherical thrust bearing, SAM, igubal®
Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

dari 76.384 IDR/Buah
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

dari 151.508 IDR/Buah
Spherical bearing, low cost, KGLM LC, J4, igubal®
Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

dari 75.768 IDR/Buah
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

dari 134.708 IDR/Buah
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

dari 259.280 IDR/Buah
Double joint, EGZM, J4VEM, igubal®
Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

atas permintaan
Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

dari 118.244 IDR/Buah
Variable coupling joint, WDGM, with ball studs, igubal®
Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

dari 184.660 IDR/m
Variable double joint, KDGM, R, igubal®
Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

dari 308.868 IDR/Buah
Variable double joint, KDGM, EK, igubal®
Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

dari 452.788 IDR/Buah
Clevis joint, GERI, igubal®
Clevis joint, GERI, igubal®

Right-hand thread

dari 59.276 IDR/Buah
Spherical bearing, slim line, KGLI SL, igubal®
Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

dari 64.988 IDR/Buah
Clevis joint with pin and circlip, GERIK, igubal®
Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

dari 66.920 IDR/Buah
Split pillow block bearing for square profiles, ESQM, igubal®
Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

dari 2.060.352 IDR/Buah
Clip bearing with galvanised steel ball studs, igubal®
Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

dari 84.000 IDR/Buah
Ball stud made of tribo-plastic with male thread, GZRM, igubal®
Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

dari 14.252 IDR/Buah
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

dari 54.600 IDR/Buah
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

dari 888.160 IDR/m

Konsultasi

Photo
Sophian Bin Saob

National

+62 21 7588 1933
Tulis e-mail

Pengiriman dan konsultasi

Secara pribadi:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

Online:

Senin sampai Jumat dari jam 8.30 - 17.30 WIB

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.