dryspin flange lead screw nut, dryspin® high helix thread, preloaded, JFRM

Material: iglidur® J
Thread direction: Right-hand thread
Thread type: High helix thread dryspin®
Design: preloaded
Cylindrical lead screw nut with flange

Tidak yakin akan pas?

Keterangan produk

Clearance-free and vibration-reducing lead screw nuts

What is axial clearance and how can it be prevented?
Axial clearance can be used to describe the lost motion, the "dead travel", on the lead screw due to the gap between the lead screw and the lead screw nut. The term clearance is also often associated with it, but the correct technical term is however axial clearance. [Link id="268"]

Low clearance:
our LC lead screw nuts are all equipped with two elastomer O-rings. The functional principle is similar to the AB lead screw nut. However, with the help of the LC lead screw nut, a reduction in clearance can be achieved in this case. The O-rings apply a circumferential radial pretension to the thread system, pressing the flanks of the lead screw nut and the threads of the lead screw. This ensures a constant axial and radial pretension of the nut. The high operational smoothness and cost-effective purchase are further advantages of the LC lead screw nut.

► Reduced axial clearance due to circumferential radial pretension
► High operational smoothness due to reduction of possible vibrations
► Cost-effective alternative to zero backlash nut

► In dryspin® high helix and trapezoidal thread up to 14mm thread diameter
► Flange lead screw nut
► Direction of thread: RH
► Material: iglidur® J

What other possibilities does the igus product range offer?
To reduce the unwanted axial clearance, in addition to the correct choice of material, a pretension mechanism has proven to be an effective measure. For our dryspin® high helix threads and trapezoidal threads there are three versions with pretension: Zero-Backlash, Low-Clearance and AB lead screw nut.

^{Important information: for applications with high loads, hot temperatures or in heavily polluted environments, a standard lead screw nut should always be used. The reason for this is that all three principles are cancelled out by too high loads. For this reason, the maximum static axial loads are specified separately for each lead screw nut model.}

Data teknis

Alat Online

Expert system for lead screw systems

Help with selecting the optimal lead screw system for your application, service life calculation for desired lead screw drive configuration, PDF download with all details about required application

Lead screw configurator

Individual pin machining without CAD software, 2D dimensioned drawing and 3D step file, generated directly online, immediate price calculation, order online straight away or request quotation

Contoh Aplikasi

Lubrication-free lead screw and linear technology in filling systems for reaction vessels

Trapezoidal lead screws with matching nuts have been installed at various points in this fully automatic filling plant for medical devices.

High-performance polymers in labelling machines

Dry operating high-performance polymers from igus® enable a wide range of settings in Krones' labelling machines.

Lead screw drive application examples

This page shows various application examples for dryspin® lead screw drives, which require no lubrication or maintenance.

Beer lift for DIY application

Lubrication-free lead screw drives in a DIY beer lift

Sliding steps on trains

Lubrication-free lead screw drives in sliding steps on trains

Komponen untuk peralatan kebugaran dan rehabilitasi

Komponen polimer untuk pengoperasian terus menerus setiap hari dalam peralatan fitness: tangguh, peredam-getaran, bersih, ringan, tidak bising

Unduhan

Solusi lainnya

dryspin® lead screw nut, high helix thread, J350SRM

iglidur® J350 is suitable for high temperatures and low coefficient of friction at medium load.

dari 465.640 IDR/Buah

dryspin® flange lead screw nut, high helix thread, J350FRM

iglidur® J350 is suitable for high temperatures and low coefficient of friction at medium load.

dari 579.544 IDR/Buah

dryspin® flange lead screw nut with spanner flat, high helix thread, RFLM

iglidur® R is very resistant to wear and runs with low coefficients of friction during dry operation. Due to the low moisture absorption, it is resistant to dirt, water or chemicals and can withstand low to medium loads.

dari 347.200 IDR/Buah

SG high helix lead screw nut, JSLM

iglidur® J is used for high speed and low wear, but also for best coefficient of friction.

dari 1.430.968 IDR/Buah

SG high helix thread nut with flange, zero backlash, JFRM

iglidur® J is used for high speed and low wear, but also for best coefficient of friction.

dari 1.113.280 IDR/Buah

dryspin® trapezoidal lead screw nut with flange, A180FRM

iglidur® A180 conforms to FDA and can be used in the food sector, beverage and medical technology. Proven in quiet dry operation, it can also be used in wet environments and withstands low to medium loads

dari 455.980 IDR/Buah